Analog Oscilloscopes GOS-6100 Series

Features

* 100MHz Bandwidth, Dual Channel, Delayed Sweep
* Built-In 6 digits Universal Counter (GOS-6103C)
* 10 Sets Memory for Front Panel Setting Save & Recall (GOS-6103/GOS-6103C)
* Time Base Auto-range (GOS-6103/GOS-6103C)
* Cursor Readout with 7 Measurements
* Panel Setup Lock of Digital-Control Functions
* Buzzer Alarm
* LED Indicators
* TV Synchronization

The GOS-6100 Series is a 100MHz, two-channel, dual-sweep, and portable oscilloscope for general purpose use. A microprocessor-based operating system controls most of the functions of the instrument, including cursor readout and digitized panel setting.

On-screen alphanumeric readout and cursor function for voltage, time, frequency and phase measurement provide extraordinary operational convenience. The advance Time Base Auto-rang function conveniently acquires waveforms at the push of button (GOS-6103/ 6103C). Ten different user defined instrument settings (GOS-6103/ 6103C) can be saved and recalled without restriction.

The vertical deflection system has two input channels. Each channel has 11 basic deflection factors from 2mV to 5V per division. The horizontal deflection system provides single, dual or delayed sweeps from 0.5s to 50ns per division (delayed sweep, 50ms to 50ns per division). The trigger system provides stable triggering over the full bandwidth of the vertical deflection system.

CRT

Type

6-inch rectangular type with internal graticule;
0%, 10%, 90% and 100% markers.
8 x 10 div (1 div = 1 cm)

Accelerating Potential

16kV approx. (GOS-6103/GOS-6103C), 12 kV approx.(GOS-6112)

Illumination

Continuously adjustable (GOS-6103/GOS-6103C)

Z-axis input

Coupling : DC
Sensitivity: 5V or more
Maximum input voltage : 30V (DC + AC peak) at 1kHz or less
Bandwidth : DC ~ 5 MHz

VERTICAL SYSTEM

Sensitivity

2mV~5V/div, 11 step in 1-2-5 sequence

Sensitivity Accuracy

f3% (5div at the center of display)

Vernier Vertical Sensitivity

Continuously variable to 1/2.5 or less of panel-indicate value

Bandwidth(-3dB)

DC~100MHz (2mV/div:DC~20MHz)

Rise Time

3.5ns (2mV/div:17.5ns)

Signal Delay

Leading edge can be monitored

Max. Input Voltage

400V(DC+AC peak) at 1kHz or less

Input Coupling

AC, DC, GND

Input Impedance

1MΩ±2% // approx. 25pF

Vertical Mode

CH1,CH2,DUAL(CHOP/ALT), ADD, CH2 INV.

Bandwidth Limited

20MHz

Common-Mode Rejection Ratio

50:1 or better at 50kHz

Dynamic Range

8 div at 60MHz
5 div at 100MHz

HORIZONTAL SYSTEM

Horizontal Modes

MAIN(A), ALT, DELAY(B)

A(main) Sweep Time

50ns~0.5s/div, continuously variable (UNCAL)

B(delay) Sweep Time

50ns~50ms/div

Accuracy

±3% (±5% at x 10 MAG)

Sweep Magnification

x 10 (maximum sweep time 5nS/div)

Hold Off Time

Variable

Delay Time

1μs~5s

Delay Jitter

Better than 1:20000

Alternate Separation

Variable

TRIGGER

Trigger Modes

AUTO, NORM,TV

Trigger Source

CH1, CH2, LINE, EXT

Trigger Coupling

AC, DC, HFR, LFR

Trigger Slope

"+" or "-" polarity or TVsync polarity

Trigger Sensitivity

Mode	Frequency	INT	EXT
AUTO	10Hz~20MHz 20MHz~100MHz	0.35div 1.5div	50mV 150mV
NORM	DC~20MHz 20MHz~100MHz	0.35div 1.5div	50mV 150mV
TV	sync singnal	1div	200mVpp

TV sync

TV-V, TV-H

Max. External Input Voltage

400V (DC+AC peak) at 1kHz

External Input Impedance

1MΩ±5% // approx.25pF

X-Y OPERATION

Mode

X-axis: selectable CH1, CH2, EXT
Y-axis: selectable CH1, CH2, CH1 and CH2

Sensitivity Accuracy

2mV~5V/div±3% ; EXT : 0.1V/div±5%

X-axis Bandwidth

DC~500kHz(-3dB)

Phase Error

3° or less from DC~50kHz

OUTPUT SIGNAL

Trigger Signal Output

Voltage: approx. 25mV/div into 50Ω
Frequency response : DC ~ 10MHz

Calibrator Output

1kHz Square wave, 2Vpp±2%

CURSOR READOUT FUNCTION

Cursor Measurement Function

ΔV, ΔV%, ΔVdB, ΔT, 1/ ΔT, ΔT%, Δθ

Cursor Resolution

1/100 DIV

Effective Cursor Range

Vertical: ±3div ; Horizontal: ±4 div

Panel Setting Display

Vertical: V/div(CH1,CH2),UNCAL,ALT/CHOP/ADD,INV, probe factor,AC/DC/GND
Horizontal: s/div(MTB, DTB), UNCAL, x 10MAG, delay time , HO
Trigger: source, coupling, slope, level, TV-V, TV-H
Others: X-Y lock, save/recall MEM 0-9 (GOS-6103/GOS-6103C)

AUTO MEASUREMENT FUNCTION (GOS-6103C)

Parameter Function

FREQ, PERIOD, ±WIDTH, ±DUTY (+ or - polarity selected by trigger slope)

Display Digits

Max. 6-digits, decimal

Frequency Range

50Hz ~ 100MHz

Accuracy

1kHz ~ 100MHz : 0.01% ; 50Hz ~ 1kHz : 0.05%

Measuring Sensitivity

> 2 div (Measuring source selected from CH1 and CH2 as synchronous signal sources)

SPECIAL FUNCTION

TIME/DIV Auto Range

Provided (GOS-6103/GOS-6103C)

Panel Setting Save & Recall

10 sets (GOS-6103/GOS-6103C)

Panel Setups Lock

Provided

POWER SOURCE

AC 100V/ 120V/ 230V±10% , 50/60Hz

DIMENSIONS & WEIGHT

310(W) x 150(H) x 455(D) mm; Approx. 9kg

Accessories

User manual x 1, Power cord x 1
GTP-100A-2: 100MHz (10:1/1:1) Switchable Passive Probe (one per channel)

Optional Accessories
GTL-110 Test lead, BNC-BNC heads
GTC-001 Instrument cart, 450(W) x 430(D)mm (120V input socket)
GTC-002 Instrument cart, 330(W) x 430(D)mm (120V input socket)

ORDERING INFORMATION :

GOS-6112 100MHz, 2-channel, Analog Oscilloscope
GOS-6103 100MHz, 2-channel, Analog Oscilloscope
GOS-6103C 100MHz, 2-channel, Analog Oscilloscope with 100MHz Frequency Counter

CV.ANDALAN PRIMA SEJAHTERA

Analog Oscilloscopes GOS-6100 Series

Detail Produk

Analog Oscilloscopes GOS-6100 Series

Permintaan Penawaran

Kategori Produk

Link