GWINSTEK-USA
Analog Function Generators GFG-3015
|
|||||||||||||||
|
MAIN
|
|
Output Waveforms | Sine, Square, Triangle, Ramp, Pulse, AM, FM, Sweep, Trigger, Gate or Burst |
Frequency Range | 10mHz~15MHz in 8 frequency range(auto switch) |
Frequency Resolution | 15MHz~150kHz(100Hz) 1.5MHz~15kHz(10Hz) 150kHz~1.5kHz(1Hz) 15kHz~150Hz(0.1Hz) 1.5kHz~15Hz(10mHz) 150Hz~1.5Hz(10mHz) 15Hz~0.15Hz(10mHz) 1.5Hz~0.01Hz(10mHz) |
Frequency Accuracy | 0.02% ±5 count |
Output Impedance | 50Ω±10% |
Amplitude Range | 10.00V ~ 0.01V(into 50Ω) 4 amplitude range |Vac peak| + |Vdc| = 5V Resolution : 10mV (10.00V ~ 0.01V) |
Amplitude Accuracy | <3% ± 5count at 10Hz ~ 1MHz <10% ± 5count at 1MHz ~ 15MHz |
Amplitude Unit | Vpp , Vrms , dBm |
DC Offset | -5V ~ 5V (into 50Ω); resolution 10mV |
DC Offset Accuracy | <3%±3count at minimum amplitude |
Duty Control | 80% ~ 20%, ~ 1MHz; resolution 1% |
Duty Accuracy | <1% ~ 1MHz at 50% duty |
Display | Dual display for frequency 6 digits and amplitude 4 digits |
SINE WAVE
|
|
Distortion | <0.5%(-46dBc), 10Hz~ 100kHz <-30dBc, ~15MHz (1Vpp~10Vpp) |
TRIANGLE WAVE
|
|
Linearity Error | <1% of full scale output at 100Hz |
SQUARE WAVE
|
|
Asymmetry | ±1% of period + 3nS |
Rise or Fail Time | <18 nS |
SYNC OUTPUT
|
|
Impedance | 50Ω±10% |
Level |
>1Vp-p open circuit |
MODULATION CHARACTERISTICS
|
|
Types | AM, FM, Sweep, Trigger(int/ext), Gate or Burst (implement by trigger type) |
Waveform | Sine, Square, Triangle, Ramp or Variable Symmetry Pulse |
Rate Frequency Range | 10mHz~10kHz in 3 frequency range (auto switch) |
Rate Frequency Accuracy | 5% ±1 count |
Rate Frequency Resolution | 10.0kHz~0.1kHz(100Hz) 99Hz~1Hz(1Hz) 0.99Hz ~ 0.01Hz(0.01Hz) |
Symmetry | 90% : 10% : 90%; resolution : 1% |
Symmetry Accuracy | ±1 count(<± 1%) |
Output Level | >1Vpp into 10kΩ load |
Sine Wave Distortion | <2% from 10Hz ~ 10kHz |
AMPLITUDE MODULATION
|
|
Depth |
0 ~ 100% |
Modulation Frequency Rate | 0.01Hz ~ 10kHz(INT) ; DC ~ 1MHz(EXT) |
Carries -3dB Bandwidth | <100Hz to >5MHz |
External Sensitivity | <10Vpp for 100% modulation |
FREQUENCY MODULATION
|
|
Deviation | 0 ~ ±15% |
Modulation Frequency Rate |
0.01Hz ~ 10kHz(INT) ; DC ~ 50kHz(EXT) |
External Sensitivity | <5Vpp for 15% deviation |
SWEEP CHARACTERISTICS
|
|
Sweep Range | 15MHz ~ 150kHz; 1.5MHz ~ 15kHz; 150kHz ~ 1.5kHz; 15kHz ~ 150Hz; 1.5kHz ~ 15Hz; 150Hz ~ 1.5Hz; 15Hz ~ 0.15Hz; 1.5Hz ~ 0.01Hz |
Width | >100:1(in the same frequency range) |
Rate | 0.01Hz ~ 10kHz |
Symmetry Control | 90% ~ 10%, resolution:1% |
Mode | Linear /Log sweep |
Sweep Output | 0>-5Vpp into 10kΩ |
TRIGGER CHARACTERISTICS
|
|
Start/Stop Phase Range | 80° ~ 90° |
Rate | 0.1Hz ~ 10kHz |
Frequency Range | 0.1Hz ~ 1MHz(Useful ~ 10MHz) |
Ext Trig Frequency Range | DC ~ 1MHz, TTL compatible input level |
Gate or Burst | Implement by trigger setting |
VCF
|
|
Range | 100:1 (0 ~ 10V ±1V) |
Input Linearity | <0.5% ~ 1MHz, <5% ~ 10MHz |
Input Impedance | 10 kΩ |
GCV OUTPUT
|
|
0.2V ~ 2V as per different frequencies in the same frequency range | |
FREQUENCY COUNTER
|
|
INT/EXT |
Switch selector |
Range | 5Hz ~ 150MHz EXT |
Accuracy | Time base accuracy ±1 count |
Time Base | ±20ppm(23°C ±5°C) after 30 minutes warm up |
Resolution | 100nHz for 0.1Hz, 1Hz for 100MHz |
Input Impedance | 1MΩ // 150pF |
Sensitivity | <35mVrms(5 ~ 100MHz), <45mVrms(100MHz~150MHz) |
MEMORY | |
Save/Recall | 10 sets of front panel setting memories |
INTERFACE | |
RS-232C | |
POWER SOURCE | |
AC115V/230V ±15%, 50/60Hz | |
ACCESSORIES
|
|
User manual x 1 Power cord x 1 Test Lead GTL-101 x 2 |
|
DIMENSIONS & WEIGHT | 290(W) x142(H) x 460(D)mm, Approx. 5kg |
Accessories :
User manual x 1,
Power cord x 1,
Test Lead GTL-101 x 2
Ordering Information :
GFG-3015 15MHz Programmable Function Generator
Analog Function Generators GFG-8200A Series
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
SPESIFICATION :
GFG-8215A/8216A/8217A/8219A
|
GFG-8250A / 8255A
|
|
MAIN | ||
Frequency Range |
0.3Hz ~ 3MHz (7 Range)
|
0.5Hz ~ 5MHz (7 Range)
|
Amplitude | >10Vpp (into 50Ω load) | |
Impedance | 50Ω±10% | |
Attenuator | -20dB±1dBx2 | |
DC Offset | <-5V ~ >5V (into 50Ω load) | |
Duty Control | 80% ~ 20%, maximum 1MHz (continuously adjustable) | |
Display | 6 digits LED display *GFG-8215A does not have a display |
|
Range Accuracy | ±5%+1Hz (at 3 positions) *only for GFG-8215A | |
SINE WAVE | ||
Distortion |
< 1%, 0.3Hz ~ 200kHz
|
< 1%, 0.5Hz ~ 100kHz
|
THD (Total Harmonic Distortion) |
< 35dB, below fundamental in all ranges, from Max to 1/10 level
|
< 30dB, below fundamental in all ranges, from Max to 1/10 level
|
Flatness |
< 0.3dB, 0.3Hz ~ 300kHz
< 0.5dB, 300kHz ~ 3MHz |
< 0.3dB, below 500kHz
< 1dB, below 5MHz |
TRIANGLE WAVE | ||
Linear |
> 98%, 0.3Hz ~ 100kHz
> 95%, 100kHz ~ 3MHz |
> 98%, 0.5Hz ~ 100kHz
> 95%, 100kHz ~ 5MHz |
SQUARE WAVE | ||
Symmetry |
±2%, 0.3Hz ~ 100kHz
|
±2%, 1Hz ~ 100kHz
|
Rise or Fall Time |
< 100nS at maximum output (into 50Ω load)
|
< 50nS at maximum output (into 50Ω load)
|
CMOS OUTPUT | ||
Level | 4Vpp±1Vpp ~ 14.5Vpp±0.5Vpp adjustable | |
Rise or Fall Time | < 120nS | |
TTL OUTPUT | ||
Level | > 3Vpp | |
Fan Out | 20 TTL load | |
Rise or Fall Time | < 25nS | |
VCF (Voltage Controlled Frequency) | ||
Input Voltage | 0V ~ 10V±1V (100 : 1) | |
Input Impedance | 10kΩ±10% | |
GCV (Generator Controlled Voltage) (GFG-8219A/8255A) | ||
Output Voltage | Sets the voltage between 0V ~ 2V according to the frequency | |
SWEEP OPERATION (GFG-8217A/8219A/8255A) | ||
Sweep Selection | Switch selector | |
Sweep Rate | Maximum 100 : 1, adjustable | |
Sweep Time | 0.5sec ~ 30sec, adjustable | |
Sweep Mode | Lin/Log switch selector | |
AMPLITUDE MODULATION (GFG-8219A/8255A) | ||
Depth | 0 ~ 100% | |
MOD. Frequency | 400Hz (INT), DC ~ 1MHz(EXT) | |
Carrier BW |
100Hz ~ 3MHz (-3dB)
|
100Hz ~ 5MHz (-3dB)
|
EXT Sensitivity | < 10Vpp for 100% modulation | |
FREQUENCY MODULATION (GFG-8219A/8255A) | ||
Deviation | 0 ~ ±5% | |
MOD. Frequency | 400Hz (INT), DC ~ 20kHz(EXT) | |
EXT. Sensitivity | < 10Vpp for 10% modulation | |
FREQUENCY COUNTER (GFG-8216A/8217A/8219A/8250A/8255A) | ||
INT/EXT | Switch selector | |
Range |
0.3Hz ~ 3MHz (5Hz ~ 150MHz EXT)
|
0.5Hz ~ 5MHz (5Hz ~ 150MHz EXT)
|
Accuracy | Time base accuracy±1 count | |
Time Base | ±20ppm(23° C ± 5° C)after 30 minutes warm up | |
Resolution | 100nHz for 1Hz, 1Hz for 100MHz | |
Input Impedance | 1MΩ // 150pF | |
Sensitivity | < 35mVrms (5Hz ~ 100MHz) < 45mVrms (100MHz ~ 150MHz) |
|
POWER SOURCE | ||
AC115V/230V±15%, 50 / 60Hz | ||
DIMENSIONS & WEIGHT | ||
251(W) x 91(H) x 291(D)mm
Approx. 2.0 kg(GFG-8215A) Approx. 2.1 kg(GFG-8216A) Approx. 2.15kg(GFG-8217A) Approx. 2.2 kg(GFG-8219A) |
251(W) x 91(H) x 291(D)mm
Approx. 2.3 kg (GFG-8250A) Approx. 2.4 kg (G |
Accessories :
User manual x 1
Power cord x 1
Test lead GTL-101 x 2
Test lead GTL-101 x 1 (GFG-8215A)
Analog Function Generators GFG-8020H
|
|||||||||||||||
|
SPESIFICATION :
MAIN OUTPUT
|
|
Waveform | SINE, TRIANGLE, SQUARE, TTL pulse and CMOS output |
Amplitude | >20Vp-p (open circuit ) >10Vp-p (into 50Ω load) |
Impedance | 50Ω±10% |
Attenuator | -20dB±1dB (at 1kHz) |
DC Offset | <-10V to >+10V (<-5V to >+5V into 50Ω load) |
Duty Control | 1:1 to 10:1 continuously adjustable |
Display | 4 digits LED display |
Frequency Range | 0.2Hz to 2MHz 7 ranges |
Frequency Control | Separate coarse and fine tuning |
SINE WAVE
|
|
Distortion | <1% (0.2Hz ~ 20kHz) <2% (20kHz ~ 200kHz) |
Flatness Response | <0.2dB (0.2Hz ~ 100kHz) <1dB (100kHz ~ 2MHz) |
TRIANGLE WAVE
|
|
Linear | 98%, 0.2Hz ~ 100kHz 95%, 100kHz ~ 2MHz |
SQUARE WAVE
|
|
Symmetry | <2%, 0.2Hz ~ 100kHz |
Rise / Fall Time | <120nS |
CMOS OUTPUT
|
|
Level | 4Vpp±1Vpp ~ 14.5Vpp±0.5Vpp adjustable |
Rise / Fall Time | < 120nS |
TTL OUTPUT
|
|
Level | > 3Vpp |
Rise / Fall Time | < 30nS |
VCF
|
|
Input Voltage | Approx. 0V ~ 10V(±1V) input for 10:1 frequency ratio |
Input Impedance | 10kΩ±10% |
FREQUENCY COUNTER
|
|
Mode | Internal only |
Range | 0.2Hz ~ 2MHz |
Accuracy | Time base accuracy±1 count |
Time Base | Oscillation frequency 3.58MHz, Temp. stability ±20ppm(23° C ± 5° C) |
Resolution | 0.1Hz, 1Hz, 10Hz, 100Hz, 1kHz |
POWER SOURCE | |
AC100V/120V/220V/230V±10%, 50/60Hz | |
ACCESSORIES
|
|
User manual x 1 Power cord x 1 Test lead GTL-101 x 1 |
|
DIMENSIONS & WEIGHT | |
230(W) x 95(H) x 280(D)mm Approx. 2.1 kg |
Accessories :
User manual x1, Power cord x1, Test lead GTL-101 x1
Ordering Information :
GFG-8020H 2MHz Function Generator with 4 Digits LED Display, TTL/CMOS Output
Analog Function Generators GFG-8015G
|
|||||||||||||||
|
SPESIFICATION :
MAIN OUTPUT
|
|
Waveforms | SINE, TRIANGLE, RAMP, SQUARE, and TTL pulse output |
Amplitude | >20Vp-p (open circuit ) >10Vp-p (into 50Ω load) |
Impedance | 50Ω±10% |
Attenuator | -20dB, -20dB±1.0dB (at 1kHz) |
DC Offset | <-10V to >+10V (<-5V to >+5V into 50Ω load) |
Duty Control | 1:1 to 10:1 Continuously rating |
Frequency Range | 0.2Hz to 2MHz 7 ranges |
Range Accuracy | ±5% + 1Hz (0.2, 2.0 position) |
SINE WAVE
|
|
Distortion | <1%, 0.2Hz to 200kHz |
Flatness Response | < 0.1dB, 0.2Hz to 100kHz < 0.5dB, 100kHz to 2MHz |
TRIANGLE WAVE
|
|
Linear | 98%, 0.2Hz to 100kHz 95%, 100kHz to 2MHz |
SQUARE WAVE
|
|
Symmetry | <2%, 0.2Hz to 100kHz |
Rise / Fall Time | <100nS |
TTL OUTPUT
|
|
Level | > 3Vpp |
Rise / Fall Time | < 25nS |
VCF
|
|
Input Voltage | Approx. 0V to 10V(±1V) input for 1000:1 frequency ratio |
Impedance | 10kΩ (±10%) |
POWER SOURCE | |
AC100V/120V/220V/230V±10%, 50/60Hz | |
ACCESSORIES
|
|
User manual x 1 Power cord x 1 Test lead GTL-101 x 1 |
|
DIMENSIONS & WEIGHT | |
230(W) x 95(H) x 280(D)mm Approx. 2.0 kg |