• Precision combustible detector locates the source of even the most difficult gas escape.
• Easy to use one-handed operation with long gooseneck probe for hard to reach areas.
• Solid state sensor for reliability.
• Audio and visual indication.
• Thumbwheel operation eliminates background gas, locating leak source fast.
• Ultra sensitive sensor to 50ppm methane.
• Fast reaction time of less than 1 second.
• Operator adjustable sensitivity.
• Operator calibration of gas percentage setting for alarm levels.
• Unique tip light.

The LEAK-SENSE is not an analyser and does not MEASURE COMBUSTIBLE GAS. You must therefore take extreme care when using it, especially when COMBUSTIBLE GAS is detected by the LEAK-SENSE.

LS1/1B supplied with

• 2 x AA batteries
• Earpiece
• Soft case

• Detects all existing refrigerants which include HFC's HCFC's, CFC's, SF6, R134A and R123
• Easy to use one handed operation with long gooseneck probe for hard to reach areas

Kit contents:

• Monitor with rubber sleeve
• Pouch

• Operating temperature 0°C to + 50°C
• Storage temperature -30°C to + 60°C
• Operating humidity 0-99% Relative humidity (non-condensing)
• Measurement range 0 to 1000PPM
• Measurement resolution 1PPM Accuracy 5% or ±10PPM
• Warm up period < 2 seconds
• Battery 9V,
• NEDA 1604A or equivalent
• Auto power off Meter automatically shuts down after 15 minutes of inactivity
• Sensor type Stabilised electrochemical Gas-specific (CO)
• Typical sensor life 3 years

• The LEAK-SENSE is not an analyser and does not MEASURE COMBUSTIBLE GAS. You must therefore take extreme care when using it, especially when COMBUSTIBLE GAS is detected by the LEAK-SENSE.