715: High CO (above 10,000ppm carbon monoxide) combustion analyzer with built-in differential themometer, differential manometer, and NO measurement & NOX calculation
Use the optional A784 flow regulator to reduce the flow rate of the gas being sampled to measurable levels on high pressure systems such as gas compression engines. The A784 is included in the 715K3 kit.
Quick and simple set up
All TPI analyzers feature quick and simple set up. Fast purge and the ability to perform fuel selection during start up enable tests to be performed quickly without requiring extra set-up time after initial start up. TPI analyzers also use the last selected fuel as the default setting. This feature prevents the need to perform fuel selection every time the analyzer is turned on
The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.
Use TPI analyzers to test flue gases in gas and oil fired equipment including high efficiency furnaces and condensing boilers. Measure CO, O2, and stack temperature. Determine combustion efficiency, CO2, and CO air free. Some models include built-in differential manometer, combustible gas detection, PC communication, data logging, and can measure NO / NOX.
| 715 Specifications | |
|---|---|
| Carbon Monoxide (CO) Measurement
|
Range 0 to 9.999% Resolution .001% Accuracy +/-5ppm or 5% of reading whichever is greater
|
| Oxygen (02) Measurement
|
Range 0 to 25% Resolution 0.1% Accuracy ±0.3%
|
| Carbon Dioxide (CO2)
|
Range 0 to 25% Resolution 0.1% Calculated Value
|
| Nitric Oxide Measurement
|
Range 0 to 5,000ppm Resolution 1ppm Accuracy <100ppm: ±5ppm <1000ppm ±5% >1000ppm: ±10ppm
|
| NOX Measurement
|
Range 0 to 5,250 Resolution 1ppm Calculated Value
|
| Temperature Measurement
|
Range -40 to 1472°F, or -40 to 800°C Resolution 1°F or °C Accuracy (K-type) ±0.3%, ±2°F or ±1°C
|
| Draft/Pressure Measurement
|
N/A
|
| Gross/Net Efficiency
|
Range 0 to 100% Resolution 0.1% Calculated Value
|
| CO/CO2 Ratio
|
Range 0 to 0.999 Resolution 0.001 Calculated Value
|
| Operating Temperature
|
14°F to 122°F (-10°C to 50°C)
|
| Battery Type
|
1.5V AA (3)
|
| Selectable Fuels
|
Natural Gas, LPG, Light Oil, Heavy Oil, Bituminous Coal, Anthracite Coal, Coke, Butane, Wood, Bagasse
|
| Display Type
|
Backlit 3 line LCD
|
| Data Storage
|
10 Locations
|
| Data Logging
|
N/A
|
| Print Capability
|
Yes, via optional IR printer (A740)
|
| PC Communication
|
N/A
|
| Date & Time Function
|
24 Hour Real Time Clock
|
| Dimensions
|
200mm x 90mm x 60mm
|
| Weight
|
500g
|
| Conformity
|
BS7927 (and the draft BS7967) |
| 715 Applications |
|---|
| Tune combustion engines |
| Test CO levels in industrial boilers. |
| Measure NO and calculate NOX |
| 715 Combustion Accessories | |
| A787: Carrying Case | : Soft carrying case with shoulder strap |
| GK11M: K-type thermocouple | : Fiberglass insulated multi-purpose beaded thermocouple probe. |
| A763: Mini pump protection filter | : Provides additional protection for the pump and strain relief for the flue probe. |
| A770: Flue Probe | : Flue probe w/ water trap and filter 7.5 foot |